Neonatal Open Care System,Health Care System,Open Care System Manufacturers,Health Care System Exporters


	Neonatal Open Care System

We have designed open care system according to most advanced standards so that it provides the neonatologists with adequate and secure environment for its care. At V-care we manufacture compact open care system which is a must for every well run busy hospital. Our open care system can be operated in either servo or manual modes. To ensure optimum therapeutic output, our system is incorporated with halogen based Phototherapy system to manage the hyperbilirubinaemia without disturbing the infant. We demonstrate family of radiant warmers to meet the various thermo regulatory requisites of patient at your hospital.

Salient Features
The Electronic Controller:

It is based on microcomputerized system.
To measure infant temperature, air temperature and to set the required temperature, it is provided with a digital display system.
Large and brighter displays for easy monitoring and viewing from a distance.
Feather touch keys supplied for easy operation.
Rendered with Bar graph LED system to indicate the heater output.
Provided with manual control system.
There are few fault indications provided with alarm like as air / baby probe failure, 1 C temperature low, high temperature cut-off, power failure and 1 C temperature high.

Baby Probe
We make our system with silicon sheathed cable, which permits easy cleaning.
There is a highly sensitive sensor in which field calibrations are taken care of by software.

Baby Trolley / Tray
Baby trolley is a attachable trolley consisting of a large baby tray and made up of stainless steel frame. There are three sides acrylic collapsible walls provided with fowler and trendelenburg system.

Observation Lamp
Our open care system is provided with a halogen based lamp from which light can focus on any area of the bed.

Heater and Other Facilities
It is a ceramic heater approved by CE consisting of a single element that is placed in a parabolic reflector. We also provide with our open care system the following things:

I.V stand
Monitor tray
Oxygen cylinder

Technical Specifications

Physical Parmeters	Environmental Specifications
Height : 700 mm Width : 500 mm Thickness : 50 mm Working level from the ground : 1020 mm Baby tray tilt Angle on either side : +/-8⁰max Weight : 40 kgs Castors : 100 mm with 2 brake wheels and 2 non-brake wheels	Operating temperature range : 20⁰c to 33⁰C Storage temperature range : -25⁰c to 60⁰C Operating humidity range : 0 to 100% RH
Phototherapy Unit	Skin Temperature Probe
Supply to each lamp : 12V, 50W Irradiance : 6 – 8⁰W / cm / nm at bed level	Range : 28?c to 38⁰C Accuracy : +/-0.2⁰c within range Resolution : 0.1⁰c Probe Interchangeability : +/-0.2⁰c (Servo) Heater output controllable from 0 to 100% in manual mode (continuously variable)
Observation Light	Electrical Specifications
Halogen based Power required : 230V, 50W	Electrical Supply : 230V⁰10%, 50 Hz Power consumption with Heater at max. Output : 750W
Electrical Safety
As per IEC 60601-1-2 for medical equipments